Controllers

Features:

Digital with both actual and set temperature readout
Autotune facility
No ramp mode
To 1200 deg C

Features:

Digital, single stage
Programmable ramp rate
Programmable soak/hold time to 75 hours at 1 minute incriments
To 1280 deg C

Features:

Digital with both actual and set temperature readout
Programmable ramp rate
Programmable soak/hold rate to 60 hours at 1 minute incriments
To 1280 deg C

Features:

Programmable - 9 firings with 8 segments each
Full On or Off - heat or cool the kiln as fast as possable
Indefinite Hold Periods - hold the kiln temperature indefinately
Program Skip - allows the operator to skip the current step
Program Temperature Edit - allows current temperature change without interupting kiln firing
Program Hold Time Edit - allows soak/hold time to be changed without interupting kiln firing
Program Review - check entire firing prior to start
Thermocouple Offset - allows for adjustment to temperature readout
Temperature Units - centigrade or fahrenheit
Threshold Alarm - audible alarm at set temperature
Thermocouple Alarm - notifies operator of thermocouple fault
Power Fail Recovery - kiln will restart after short power interuptions
Saftey Temperature Limit - programmable top temperature limit
Computer Interface -
Data Logging

Features:

Delay Start - delays start by up to 100 hours
Power Consumption - will calculate power costs for each firing
Indefinite Hold Periods - hold kiln at temperature indefinitely
Program Skip - allows operator to skip to next segment
Program Temperature Edit - change heating or cooling rate without interupting kiln firing
Program Review - allows operator to review entire program before starting or during firing
Temperature Units - centigrade or fahrenheit
Threshold Alarm - programmable audible alarm when required temperature is reached
Thermocouple Alarm - notifies of thermocouple malfunction
Thermocouple - selectable K or PR
Power Fail Recovery - restarts after short power interuption
Program Lock - prevents unauthorised program change
Computer Interface - RS232 interface for remote programming, monitoring and data collection
Zone Control - 3 zones
Data Logging